Clean Car Engine by dry ice blasting

#dryiceblasting is a non-destructive method in which dry ice pellets replace traditional blasting materials such as sand, water, glass and plastic. It remove unwanted coating such paint, rust without secondary waste material.And most commonly used for industrial and commercial application with dry ice as cleaning media.

Liquid carbon dioxide is directed from a low-pressure storage tank into a special machine the pelletizer, and depressurised using a dispenser valve.

This procedure forms dry ice snow at a temperature of -79°C. The interactive piston in the pelletizer presses the dry ice snow through a die to form, dense dry ice pellets the size of grains of rice (3 mm). 

Dry ice is the solid form of carbon dioxide (CO2). It's called "dry ice" because it does not melt like wet ice. Instead, dry ice converts into carbon dioxide gas. Because dry ice is extremely cold ( -109°F/-78.5°C), non-toxic, and completely dry, it is commonly used as an expendable refrigerant to ship frozen food or medical products or to cool materials during production. The other major use of dry ice is for dry ice blast cleaning, an effective and environmentally friendly way to clean industrial equipment.

Yes, providing you observe some simple safety rules. The CO2 gas that sublimates from the dry ice is non-toxic (it is the same gas used in all carbonated drinks), however, in a confined space it poses an asphyxiation risk. Dry ice is also extremely cold at -78.5°C which means that if it is in contact with human skin for longer than a second or two it can lead to a "frostbite" like burn. Protective gloves should always be used.

Build-up of ink and grease on printing machinery can cause alignment problems, reduced print speed and high scrap rates. Traditional cleaning methods, such as manual scraping, are timely, create secondary waste and can damage expensive equipment. 

With non-abrasive dry ice blasting, equipment can be cleaned faster and without the risk of damaging sensitive parts.

1. The Kinetic effect: dry ice particles being accelerated to high speed.

2. The thermal effect: the dry ice particles hit the dirt layer at -78.5° C, cool it down abruptly, it contracts and forms cracks.

3. The sublimation: on impact, the carbon dioxide directly transforms from a solid to a gaseous state and expands about 700 times the volume in a split second. This expansion literally ”blasts off” the dirt from the surface.